We’re really sorry but we’ve sold out of this product and are unable to obtain more stock. In most cases this is usually because the manufacturer has discontinued the product. We don’t want you to miss out though so here’s some of our best selling products which are similar to what you are looking for. Take a look and you could just find the perfect item. Just a small point to note - they might not have the exact features as the product you initially wanted so please be sure to check the features before you buy.
The SM951 boasts outstanding performance, supporting both PCIe 3.0 and PCIe 2.0 interfaces. It can read and write sequentially at 1,600MB/s (megabytes per second) and 1,350MB/s respectively based on PCIe 2.0.
For ultra-slim notebooks and workstations wanting to adopt the PCIe 3.0 interface, the SM951 can read and write sequentially at 2,150MB/s and 1,550 MB/s respectively, which would provide approximately four times faster sequential reading performance compared to current SATA SSDs. With a PCIe 3.0 interface, the drive achieves substantially higher energy efficiency, requiring only about 450MB/s per watt for sequential reading and 250MB/s per watt for sequential writing.
In addition, the SM951 is the first SSD to adopt the L1.2 low power standby mode as defined by PCI-SIG (the PCIe standards body). By embracing the L1.2 level of standby operation, the SM951's power consumption is drastically reduced - to under 2mW, about a 97 percent decrease from the 50mW consumed using a L1 state.
Samsung's SM951 comes in the M.2 form factor, which is only about one seventh the size of a 2.5 inch SSD. The drive's compactness is well suited for most notebook PC designs, freeing up space for other components including the battery.
Product Description | Samsung SM951 MZHPV128HDGM - SSD - 128 GB - PCIe 3.0 x4 | Type | Solid state drive - internal | Capacity | 128 GB | Form Factor | M.2 2280 | Interface | PCIe 3.0 x4 | Features | Native Command Queuing (NCQ), TRIM support, End-to-end data protection, S.M.A.R.T. | Dimensions (WxDxH) | 22 mm x 80 mm x 3.73 mm | Weight | 8 g | Microsoft Certification | Compatible with Windows 7 |
General | |
Device Type | Solid state drive - internal |
Capacity | 128 GB |
Form Factor | M.2 2280 |
Interface | PCIe 3.0 x4 |
Bytes per Sector | 512 |
Features | Native Command Queuing (NCQ), TRIM support, End-to-end data protection, S.M.A.R.T. |
Width | 22 mm |
Depth | 80 mm |
Height | 3.73 mm |
Weight | 8 g |
Performance | |
Internal Data Rate | 2000 MBps (read) / 600 MBps (write) |
Maximum 4KB Random Write | 70000 IOPS |
Maximum 4KB Random Read | 90000 IOPS |
Reliability | |
MTBF | 1,500,000 hours |
Non-Recoverable Errors | 1 per 10^15 |
Expansion & Connectivity | |
Interfaces | 1 x PCI Express 3.0 x4 - M.2 Card |
Compatible Bay | M.2 2280 |
Power | |
Power Consumption | 6.5 Watt (active) , 50 mW (idle) , 2 mW |
Miscellaneous | |
Compatible with Windows 7 | "Compatible with Windows 7" software and devices carry Microsoft’s assurance that these products have passed tests for compatibility and reliability with 32-bit and 64-bit Windows 7. |
Compliant Standards | APM, UL, TUV, VCCI, C-Tick, BSMI, CB, IC, FCC, RoHS, KCC |
Environmental Parameters | |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 70 °C |
Shock Tolerance (non-operating) | 1500 g @ 0.5 ms half-sine pulse |
Vibration Tolerance (non-operating) | 20 g @ 10-2000 Hz |
Pop your email address below and we’ll let you know as soon as this item is back in stock: