We’re really sorry but we’ve sold out of this product and are unable to obtain more stock. In most cases this is usually because the manufacturer has discontinued the product. We don’t want you to miss out though so here’s some of our best selling products which are similar to what you are looking for. Take a look and you could just find the perfect item. Just a small point to note - they might not have the exact features as the product you initially wanted so please be sure to check the features before you buy.
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
240-pin DIMMs are used to provide DDR2 SDRAM memory for desktop computers. DDR2 is a leading-edge generation of memory with an improved architecture that allows it to transmit data very fast.
Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules). (The Ballistix™ and Ballistix Tracer™ high-performance memory do not come in 72-bit or registered modules.)
Standard DDR2 240-pin DIMMs are available in DDR2 PC2-3200 SDRAM, DDR2 PC2-4200 SDRAM, DDR2 PC2-5300 SDRAM, and PC2-6400 SDRAM.
To use DDR2 memory, your system motherboard must have 240-pin DIMM slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit into a standard SDRAM DIMM socket or a DDR DIMM socket.
The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins. The notch in a 240-pin DDR2 DIMM is closer toward the center of the module.
| Product Description | Crucial - DDR2 - kit - 4 GB: 2 x 2 GB - DIMM 240-pin - 1066 MHz / PC2-8500 - unbuffered | Product Type | Memory kit | Capacity | 4 GB: 2 x 2 GB | Memory Type | DDR2 SDRAM - DIMM 240-pin | Upgrade Type | Generic | Data Integrity Check | Non-ECC | Speed | 1066 MHz (PC2-8500) | Latency Timings | CL7 | Features | Unbuffered | Voltage | 1.8 V | Manufacturer Warranty | Limited lifetime warranty |
General | |
| Capacity | 4 GB: 2 x 2 GB |
| Upgrade Type | Generic |
Memory | |
| Type | DRAM memory kit |
| Technology | DDR2 SDRAM |
| Form Factor | DIMM 240-pin |
| Module Height (inch) | 1.18 |
| Speed | 1066 MHz (PC2-8500) |
| Latency Timings | CL7 |
| Data Integrity Check | Non-ECC |
| Features | Unbuffered |
| Module Configuration | 256 x 64 |
| Voltage | 1.8 V |
Expansion / Connectivity | |
| Compatible Slots | 2 x memory - DIMM 240-pin |
Manufacturer Warranty | |
| Service & Support | Limited lifetime warranty |
Pop your email address below and we’ll let you know as soon as this item is back in stock:
