BT.com
Wishlist

Crucial 1GB 200-pin SODIMM DDR2 PC2-6400

Crucial 1GB 200-pin SODIMM DDR2 PC2-6400

Product overview

Discontinued

Delivery

Standard Due date unavailable

A small outline dual inline memory module (SODIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). SODIMMs get their name because they are smaller and thinner than regular DIMMs. The gold pins on the bottom of the SODIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a SODIMM are not connected.

200-pin SODIMMs are used to provide DDR and DDR2 SDRAM memory for notebook computers. 200-pin SODIMMs are available in PC2700 DDR SDRAM, PC3200 DDR SDRAM, DDR2 PC2-6400 SDRAM, DDR2 PC2-5300 SDRAM, DDR2 PC2-4200 SDRAM and DDR2 PC2-3200 SDRAM. To use DDR or DDR2 memory, your system motherboard must have 200-pin SODIMM slots and a DDR- or DDR2-enabled chipset. A DDR or DDR2 SODIMM will not fit into a standard SDRAM SODIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)

The number of black components on a 200-pin SODIMM can vary, but it always has 100 pins on the front and 100 pins on the back, for a total of 200. 200-pin SODIMMs are approximately 2.625 inches long and 1.25 inches high, though the heights can vary. Like 144-pin SODIMMs, 200-pin SODIMMs have one small notch within the row of pins; however, the notch on the 200-pin SODIMMs is closer to the left side of the module.

Specifications

Summary

Product Description
Crucial - DDR2 - 1 GB - SO-DIMM 200-pin
Product Type
RAM memory
Capacity
1 GB
Memory Type
DDR2 SDRAM - SO-DIMM 200-pin
Upgrade Type
Generic
Data Integrity Check
Non-ECC
Speed
800 MHz ( PC2-6400 )
Latency Timings
CL6
Features
Unbuffered
Voltage
1.8 V
Manufacturer Warranty
Limited lifetime warranty
Designed For
DFI AM300-BF, CA230-BF, CT930-b, G5C100-N; Intel Desktop Board MGM45RM, MGM45WU; J&W MINIX-780G-SP128MB; MSI Fuzzy RS690T

Detail

General

Capacity
1 GB
Upgrade Type
Generic

Memory

Type
DRAM
Technology
DDR2 SDRAM
Form Factor
SO-DIMM 200-pin
Module Height (inch)
1.25
Speed
800 MHz ( PC2-6400 )
Latency Timings
CL6
Data Integrity Check
Non-ECC
Features
Unbuffered
Module Configuration
128 x 64
Voltage
1.8 V

Expansion / Connectivity

Compatible Slots
1 x memory - SO-DIMM 200-pin

Manufacturer Warranty

Service & Support
Limited lifetime warranty

Compatibility Information

Designed For
DFI AM300-BF, CA230-BF, CT930-b, G5C100-N , Intel Desktop Board MGM45RM, MGM45WU , J&W MINIX-780G-SP128MB , MSI Fuzzy RS690T

Customer reviews

Write review The opinions expressed in this reviews section are those of our customers and not of BT Shop. Nothing contained herein amends BT Shop’s terms and conditions.
5* Good product - but check compatability first!!!!
Reviewed by KB on 01/10/2009
If you thought the days of checking memory compatability went out with low and High density PC133 SDRAM, think again.

I fell into the trap of thinking that DDR2 ram was DDR2 ram and as long as the speed rating was adequate for your needs you were good to go.

I found that this memory isn't compatible with machines using the ATI RADEON XPRESS 200M (RC410M)chipset. e.g. Toshiba Satellite A110-162.

Machine wouldn't boot at all with the stick in the bottom slot and in the top slot was only recognised as 512MB.

In a C2D 965 chipset machine it works fine.

4 stars for vfm as 1GB SODIMMs were £9.99 just a few months ago. (now 15% higher!)
Scroll to top